List of hotkeys of the program
Global¶
- Ctrl-Tab / Ctrl-Shift-Tab — Cycled switch between program windows
- Ctrl-NumPlus / Ctrl-NumMinus — Increment and decrement font size in grids
Main window¶
- F2 — Switch view mode between Monitor and Stream
- F5 — Start/stop sream recording
- F8 — Open dialog for making marker/break point record in stream
- F9 — Make marker/break point record in stream with default label based on OS tick timer
- F11 — Separated data monitoring for each channel for a CAN-GateWay device
- F12 — Open tracer
- Ctrl-F — Open device filter panel and tool panel for a CAN-GateWay device
- Ctrl-F12 — Transfer recorded stream to tracer
Receive panel¶
Monitor mode¶
- F3 — View message bit-map
- F4 — Set comment for message (If streaming recording has started, this comment is set for all recorded new messages with a defined ID)
- Ctrl-F3 — View all received data of selected message (if defined option "Activate frame counter"). Don't open the window for frequently updated messages.
- Ctrl-N — Clear all data in monitor
Stream mode¶
- F3 — View all received data of selected message (if defined option "Activate frame counter"). Don't open the window for frequently updated messages.
- F4 — Set comment for selected message
- Ctrl-N — Clear all data in stream
Quick search¶
In monitor and stream mode, you can use a quick search for the needed message. Move the focus with mouse or Tab key to the data grid, then use the following keys:
- 0 - 9 / A - F — Search the needed message ID
- Backspace — Remove last char in quick search
- Esc — Clear quick search
In stream available additional keys:
- Left — Move the cursor to the previous message with ID that starts with the specified number in the quick search
- Right — Move the cursor to the next message with ID that starts with the specified number in the quick search
Transmit panel¶
- Ins — Add new task for transmit
- Del — Remove selected task
Filter panel¶
- Space — Enable/Disable filter
- Enter — Set filter settings
Tracer¶
- F5 — Set break point/marker or disable/enable break point
- F8 — Step by step tracing
- F9 — Run tracer
- Delete — Remove break point/marker
- Ctrl-F — Open message type filter for tracing
- Ctrl-O — Open saved trace file
- Ctrl-F5 — Open Break points/Markers manager
Break points/Markers manager¶
- Del — Remove break point/marker
- F4 — Edit label and comment for break point/marker
- F5 — Enable/Disable break point (if opened from tracer)